Home > New Gilsson High Performance GPS Antennas

MSN Search












Gilsson Technologies New High Performance GPS Antennas

High-Performance Amplified GPS Antennas with various connectors suited for a wide variety of applications and GPS Receivers.

Active external GPS antenna for Garmin iQue, Quest, StreetPilot 2620, GPSMap 60CS
click for larger image

Unique Features

  • Exceptional performance at unbeatable prices, Gilsson's remote patch antenna greatly amplifies GPS signal reception whether you are navigating the city jungle or on an outdoor adventure.
  • In satisfying user-specific needs, we offer versatile mounting options for mobile, aviation and marine installations.
  • Unique user removable magnets eliminate interference with compasses in hiking, marine and aviation applications.
  • Light Weight: 60g
  • Ultra High dB Gain: 32dB ~ 55 dB
  • Ultrasound sealed housing: 100% Waterproof.
  • Power Protection Circuit.
  • Reverse Polarity Shutdown.
  • Over Current Sense Shutdown.
  • EMI Power line Suppression

Note: 3-ft. and 16-ft. length cables are temporarily out of stock.

90 degree (right angle) MCX connector ($50.95):

Length

180 degree (straight) MCX connector ($50.95):
Length


MMCX connector ($50.95):
Length


BNC Connector ($50.95):
Length


SMB Male Connector ($57.95):
Length


SMB Female Connector ($70.95):
Length

Resellers and distributors: Please visit our reseller page for information on quantity pricing and other benefits.

Related pages:

GPS antennas page
Garmin GPS antennas page
Magellan GPS antennas page
Navman GPS antennas page
GPS accessories page
Gilsson product compatibility page

Gilsson GPS accessories

Product Specifications

  • Dimensions: Compact footprint of 47.0 x 45.4 x 14.4 mm
  • Light Weight: 60g
  • Available Radome Colors: Black, Silver, Blue, Red and Orange (Default: Black)
  • Ultra High dB Gain: 32dB ~ 55 dB
  • Operating Voltage: Input voltage of +3vdc ~ +5vdc.
  • Ultra Low Power Consumption - 18mA (compared to 25mA on competing models)
  • Operating Temperature: -40C ~ +85
  • Operating Humidity: 40% ~ 95% RH
  • Center Frequency: 1575 MHz
  • Noise Figure: 1.5dB Max
  • Ground reception power sensitivity at over –130dB.
  • Heavy Duty Construction: Polycarbonate radome, die-cast base with user detachable magnets
  • Ultrasound sealed housing: 100% Waterproof.
  • Power Protection Circuit.
  • Reverse Polarity Shutdown.
  • Over Current Sense Shutdown.
  • EMI Power line Suppression.
  • Available Connectors: BNC(m), MCX(m), MMCX(m), SMA(m), SMB(m/f)
  • Available Cable Lengths: 3-ft, 9-ft or 16-ft (RG-174)
  • Versatile Mounting Means: Magnetic, Windshield Suction Mount and Permanent Flange (for surface mounting) options are available for mobile, aviation, and marine installations.

ELECTRICAL SPECIFICATION:

  • All values are defined at 25±15 °C, 65±20 % RH unless otherwise noted.
  • Antenna characteristics are measured with 70 x 70mm ground plane in an anechoic chamber.
GPS ANTENNA

Characteristics

Specification

Center Frequency

1575.42±1.023 MHz

Bandwidth

17±2 MHz

Gain at Zenith

2.0dBi min

Gain at 10o elevation

-4.0dBi min

Polarization

R.H.C.P

Axial Ratio

2.0dB max

LNA

Characteristics

Specification

Center Frequency

1575.42±1.023 MHz

Gain

30dB min

Noise Figure

1.5db max

Outbound attenuation

30dB min fo±50MHz (fo=1575.42MHz)

Output V.S.W.R

2.0dB max

Voltage

3.0~5.0V

Current

18mA±2

ELECTRICAL SPECIFICATION AFTER ENVIRONMENTAL TEST

GPS ANTENNA

Characteristics

Specification

Center Frequency

1575.42±1.023 MHz

Bandwidth

17±2 MHz

Gain at Zenith

2.0dBi min

Gain at 10o elevation

-4.0dBi min

Polarization

R.H.C.P

Axial Ratio

2.0dB max

LNA

Characteristics

Specification after environment test

Center Frequency

1575.42±1.023 MHz

Gain

30dB min

Noise Figure

2.0dB max

Outband attenuation

30dB min fo±50MHz(fo=1575.42MHz)

Output V.S.W.R

2.0dB max

Voltage

3.0~5.0V

ENVIRONMENTAL TEST ITEM

TEST Item

Test Condition

Evaluation Item

High Temperature Test

The specimens are subject to 80°C for 90 minutes.

Standard Item

According note 2

Low Temperature Test

The specimens are subject to -30°C for 90 minutes.

Standard Item

According note 2

Heat Cycle Test

-40°C 2Hß à ( 2H ) ß à 85°C 2H. 30 cycles, then stored at standard evaluation condition for more then 2 hours.

Standard Item

According note 2

Heat/Humidity Cycle Test

 

5 cycles, then stored at standard evaluation condition for 60±10 minutes.

Standard Item

According note 2

Thermal Shock Test

-40°C 2Hß à (5 minutes) ß à 85°C 2H. 30 cycles, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

High Temperature Storage Test

The specimens are subject to 85°C for 96 hours, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Low Temperature storage Test

The specimens are subject to -40°C for 72 hours, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Water proofing

Test

The specimens are subject to 80°C for 1 hours, then sprays water at more than 600mm/H for 1 hour, then stored at Standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Moisture Resistance Test

The specimens are subject to 60°C, 90%RH for 96 hours, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Heat/Vibration Test

Vibration : 33 to 50 Hz 15 min, sweep 1 G for 4 hours

Heat Cycle: -40°C 25 min ß à 5 min ß à 85°C 25 min, 4 cycles then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Weather Resistance Test

The specimens are subject to below conditions in a sunshine weather meter, then stored at standard evaluation condition for more than 2 hours.

Temperature of black panel: 63±3°C

Rain: 12 minutes/60 minutes

Nozzle: Φ1mm

Water pressure at the Nozzle: 0.8 to 1.3 kg/sq.cm

Light radiation: 1200 hours

Standard Item

According note 2

High Temperature Test (operation)

The specimens are subject to DC 6.0V at 80°C for 120 hours, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Low Temperature Test (operation)

The specimens are subject to DC 4.5V at –40°C for 72 hours, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Salt Atmosphere Test

Spray 5±1% NaCl solvent (35±2°C) to the specimens for 16 then stop spraying 8 hours for 20 cycles.

Standard Item

According note 2

Package Drop Test

Packaged specimens are dropped on a common floor from 1m height in each direction along six surface, 3 mutually perpendicular and one corner.

Standard Item

According note 2

Long Time Operating Test

The specimens are subject to DC 3.3V more than 1000 hours, then stored at standard evaluation condition for more than 2 hours.

Standard Item

According note 2

Static Electrical Resistance Test

Adding ±10kV to every touchable place at 10 times, then stored at standard evaluation condition.

Standard Item

According note 2

Note 1: Standard evaluation condition; Temperature: 25±15 °C; Humidity: 65±20%RH

Note 2: Standard evaluation Items; Appearance; Gain; V.S.W.R; Electric Power Consumption

DIMENSIONS:

Compatible GPS receiver models:

ANY GPS models with an MCX (or "OSX"), MMCX, BNC, SMB female or SMB male GPS antenna connector.

Consumer Electronics Association (CEA) member
About Us | Policies | Site Terms | Site Map | Contact Us | Links | News/Articles | Reviews | Directory
Copyright © 2001-2005. All Rights Reserved. Gilsson Technologies™